|
|
 |
|
PSL has expertise in the Design, Manufacture, Supply, Erection
and Commissioning of Plants, Machinery and Equipments catering to
the Pipeline Industry.
PSL is
fully geared to set up Pipe Manufacturing and Pipe Coating Plants.
PSL's fully-equipped and adequately manned in-house
Project Engineering department has Technical Collaboration with
renowned Design and Engineering firms from Germany and Italy. |
|
Turnkey Project |
|
|
|
Pipe Manufacturing |
|
PSL is one of the largest pipe manufacturers in India with 10 Pipe Mills at strategically coast based locations in Chennai, Kandla and Daman
with an annual capacity exceeding 1,000,000 MT of size varying from
16" dia to 120" dia with wall thickness from 5mm to
25mm.
PSL manufactures and supplies SPIRAL WELD PIPES conforming to API (American Petroleum Institute) standards for Oil ,Gas and Water
Transmission as well as Structural and Piling Applications for both Onshore and Offshore sector.
|
|
|
PSL is equipped, to provide the Best in Yard Coating for large Onshore and Offshore Projects. PSL has over the years successfully
demonstrated its capability to manage, simultaneously multiple coating assignments, qualitatively and timely, both within and outside
the country. The Pipe Coating Yard today provides a wide range of Coating Services as per International Technical Specifications by
Leading Consultants.
|
|
Pipe Coating |
|
|
|
 |
|
PSL - a Premier Induction Pipe Bending Company with an expertise that spans over 2 decades – meet diverse high quality requirements
in accordance with ASTM,. API, DIN, BS, ANSI, ASME PFI and other international technical specifications.
|
|
|
PSL’s state-of-the-art plant at Kandla has mechanized foundry with induction Furnace and spectrometer for carrying out
spectrographic analysis and is equipped to manufacture in excess of
2500 Metric tones per annum of Sacrificial Anodes for cathodic
protection system. It has a well-equipped R&D centre and Computerized Design and Engineering Division to study
cathodic protection design calculations, detailed engineering design and drafting for turnkey projects.
|
|
 |
|
|
 |
|
Fusion Bonded Epoxy is ideally suited for protective coating on the complex surface configuration of a reinforcing steel bar. The
coating can withstand any hazardous environmental condition. The flexibility of the coating enables the FBE coated rebars to be as
flexible as the original bars, with moderate additional care while handling.
|
|
 |
| © Copyright 2001 PSL All Rights Reserved |
|
Disclaimer
The contents of this site are for information purposes only.
Any information or opinions contained herein have been
produced by the Company based on information obtained from
sources believed to be reliable but which it has not
independently verified. The Company makes no guarantee,
representation or warranty and accepts no responsibility or
liability as to its accuracy and completeness. Neither the
information nor any opinion expressed herein constitutes an
offer to buy or sell any investment. Such information and
opinions are subject to change without notice. The Company,
its directors, officers or employees accept no liability for
any damages or losses arising from the use of this site or
its contents. Clients should be aware that the regulatory
regimes and compensation arrangements in overseas locations
will be different in each jurisdiction. Readers should not
rely on any material contained herein and should seek
independent advice wherever necessary.
|
 |
 |
|
|
.gif){kind=small}
